Meriam 30EBX2540092 Series Well Manometers
简介：The Meriam model 30EBX25 and 30EFX25 well type manometer are direct reading manometer designed for process general purpo...
申请服务
- 产品介绍
The Meriam model 30EBX25 and 30EFX25 well type manometer are direct reading manometer designed for process general purpose production testing or laboratory measurement pressures vacuums, or differential pressures.
Designed for a maximum operating pressure of250 PSIG, these instruments can also be used to measure flow, tank level, and pressure drop or distribution across operating equipment. Raised wells can be furnished so positive and negative pressures or reversing flow can be indicated without changing the pressure connections. Various mounting styles to satisfied installation requirements are available.
The manometer body is made from an aluminum channel construction. Stainless steel end blocks, for packing the flass indicating tube, are screwed to the body. The 7/16" outside diameter glass tubing is yoke packed with viton gaskets at each end block and is supported at spaced intervals to prevent tube distortion.
The welded stainless steel manometer well has a large cross section and is readily removable for greatest ease in cleaning. Two 1/4" female pipe connections are provided on the tope side of the well; one outlet is normally used for the high pressure manometer connection, while the other, provided with a plug, is used as the well fill connection.
The unit scale, located directly behind the glass indicating tube, extends the full width of the indicating column. This scale has a white, non-glare, satin background with graduations and figures, and is compensated for liquid level change within the manometer well. The scale is adjustable for zero indicating fluid level by means of a non-slip, flexible shaft adjustment located in the lower end block and operating from the front of the instrument.
A transparent plexiglass cover protects the unit from dust and moisture. All exterior portion of the manometer are finished in textured, black urethane paint
Standard pressure connections in the upper end block and at the manometer well for connecting the instrument are 1/4" female pipe connections. Suitable drain, fill, and vent plugs are furnished with each unit.
Well type manometers are easiest to read
± 1/2 of the smallest graduation accuracy
Full scale verniers available for best resolution
Measure differential, vacuum or gauge pressure
SWP = 250 PSI or optional 500 PSI
Meriam 30EBX25-40092-02-0-0-0-0-000 Well-Type Manometer, 25PSI, 40 in range, A/F Scale, Table Mounting, Stainless
